Tefal OptiGrill Waffle Plate Stand (XA7238) – Keeps Both Plates Upright
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact stand that holds both Tefal OptiGrill XA7238 waffle plates together upright
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
My Tefal OptiGrill waffle plates (XA7238) kept falling over every time I stored them upright in the cupboard. This stand fixes that: it holds both plates back-to-back and keeps them standing, while taking up only 10 cm of shelf length.
Two versions
Wall version: foot on the front only, with a flat back so it sits flush against the cupboard wall. 100 × 76.5 × 60 mm.
Freestanding version: foot on both sides, so it can stand anywhere. 100 × 96.5 × 60 mm.
Fit
Inner slot is 44.5 mm wide (12.5 + 19.5 + 12.5 mm), with a 19.5 × 15 mm center recess for the plate bumps. It’s designed for the XA7238 plates but may fit other OptiGrill plates with similar dimensions. Check your plates before printing.
Print settings
Print as oriented, flat side down; no supports needed
Material: PLA or PETG
Layer height: 0.2 mm
Perimeters: 3
Infill: 15–20%