3D Printed Replacement Knob for Cooking Pot Lid (ABS Recommended)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement knob for a cooking pot lid, reverse-engineered and remodeled from the original part. best printed with ABS
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 1
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This replacement cooking pot lid knob was modeled based on the original component and is intended as a practical spare part for damaged or missing lid handles.
For best results, the part should be printed in ABS due to the elevated temperatures typically encountered in kitchen environments. Other materials may not provide sufficient heat resistance for long-term use.
The design does not require a threaded insert. During testing, a standard machine screw (approximately M4 or M5) was screwed directly into the printed part with satisfactory results. However, users who prefer a more durable fastening solution may install a threaded insert if desired.
Notes:
Recommended material: ABS
Designed for direct installation using a machine screw
Optional threaded insert support
Reverse-engineered from the original knob
Suitable as a replacement part for household cooking pots
⚠ Dishwasher compatibility has not yet been fully tested. Until verified, ABS is strongly recommended to maximize temperature and moisture resistance.
As always, use this model at your own discretion and inspect the part regularly for wear or heat-related degradation.