ColorMix Drawer/Door Pulls (128mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use you're imagination and create your own custom colors for these colorful ColorMix drawer pulls.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These drawer pulls will brighten up any space. Perfect for a kid's room or any kid at heart's room. 128 mm centers with 4mm inserts.
These were designed with the ColorMix feature in PrusaSlicer in mind. In my case I used 5 different color filaments, blue, red, yellow, white, and black. Each virtual extruder used a two color blend with five different virtual extruders used for printing. PETG should be used for it's strength and impact resistance. Print these standing up gives as it gives it the best quality and strength and the lowest print time. I used a 0.2 mm layer height but something lower would visually blend the colors better.