1 / 1
Quick-Release Clips for SlimeVR - DIY straps
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick-Release Clips for SlimeVR - DIY straps
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I made a "Quick release" style clips for SlimeVR DIY straps, the straps I'm using are 50mm wide, This allows you to adjust the strap with the Velcro piece and still be able to take them out and put it back on quickly. Insert the clip in an angle and lock it in place
Printed in PETG but I imagine other filaments would work as well.