GPGF-t2b - Scissors Gridfinity Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
tool2bin! scissors! gridfinity!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Another test of Tool2Bin! Seemed to work great!
Changelog:
261010 R03
R02 printed fine! But it exposed an issue that Tool2Bin was doing dead-on Gridfinity bin dimensions for the bottom.
This is ostensibly fine, but in practice it seems like plenty of bins have some clearance from the nominal design spec.
The additional clearance definitely helps bins drop into baseplates with more ease, so now Tool2Bin has a default 0.25 mm clearance (which you can turn off if you want the dead-on Gridfinity dimensions).
R03 is the same as R02 except for this clearance, so I've removed R02 from the model list entirely.
261009 R02
Implemented a "puzzle-piece" feature in Tool2Bin that removes unused cells if possible.
This saves a ton of print volume, but it also allows you to "Tetris" your bins together in a drawer and reduce dead space.
Haven't printed R02 yet but will update this post with a photo when I've done so!
A note on Tool2Bin:I built the photo-to-bin pipeline using Claude Code. I originally tagged these models as "AI-assisted creation" due to my use of AI in writing the code.
However, I chatted with the Printables team and confirmed that since the actual parametric/CAD workflow is entirely non-AI (it's OpenCV/OpenCascade), these models do not need to be marked with the AI tag.