APC AP7721 1U ATS - Rack Ear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D Printable Rack Ear replacement
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I bought a APC AP7721 missing the original rack ears, so I made that replacement part.
NOTE
I'm not responsible if this part breaks, which could damage the ATS and connected devices.
I recommend placing something underneath the unit, such as a UPS, to support it. However, this is not mandatory.
I recommend printing with ABS, ASA, or a blend such as ASA-GF. While these are not the strongest filaments, they can withstand higher temperatures.
I recommend printing it vertically, in the same orientation in which it will be installed. The holes have been adjusted for printing in this orientation.