Systainer Cyclone Seperator for Starmix iPulse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the original Separator, adapted for compatibility with the Starmix iPulse. This project is WIP!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Model Overview
This is a remix of the original Systainer Cyclone Separator for Festool Vacuum, adapted for compatibility with the Starmix iPulse system.
Only two areas have been redesigned:
Systainer connectors: Modified to fit the Starmix system.
DN160 cyclone section: Redesigned as a printable part instead of using a separate drain pipe.
In my opinion, using a DN160 drain pipe makes little sense here: it can be difficult to source, relatively expensive, and the part itself is simple enough to 3D print.
The original design is otherwise largely unchanged. The only remaining “magic” parts are the DN32 pipes.
Key Features
Compatible with the Systainer and Starmix iPulse connector system.
3D-printable DN160 section — no separate drain pipe required.
Reduced reliance on hard-to-source components.
Based on the original cyclone separator design.
Credits
This is a remix of the original design by its creator. Many thanks for sharing the original model!
Please refer to the original model for the underlying design and assembly details.
Happy printing!
I don't want to keep the other projects—which integrate seamlessly into the overall system—from you.