Bondtech INDX SBFI Middle Plate with 1515 Extrusion Mount Voron 2.4r2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Middle plate replacement for SBFI (Smooth Beefy Front Idlers) to mount a 415mm Makerbeam XL 1515 for Bondtech INDX.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Middle plate replacement for SBFI (Smooth Beefy Front Idlers) to mount a 415mm Makerbeam XL 1515 for Bondtech INDX. This is for a 350mm Voron 2.4, if you have a smaller one you could use these with a smaller length 1515. Based on the remix model info, this would be a 365mm extrusion for a 300mm V2.4 and a 315mm extrusion for a 250mm V2.4.
You should be able to reuse your magnetic front covers if you already have SBFI installed, just replace the SBFI middle plate with this modified middle plate. If you're printing SBFI from scratch, all original components from that mod will be needed plus hardware to mount the 1515 extrusion.
Would require no door or door buffer mod.
No INDX in hand so this is UNTESTED. Setup using INDX_Simplified_1_19, my dimensions varied slightly from the reference remix model in Z height.
STEP files included so you can make it custom to your length, I already had a 415mm extrusion so I made it for that length.