Bowden / teflon tube retainer (ninjaflex guide)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My first thing posted ever... This small part is solving 2 issues I found on the metal flex extruder for tevo…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
My first thing posted ever...
This small part is solving 2 issues I found on the metal flex extruder for tevo tarantula:
- Tube being pulled into the gears with retraction enabled in prints
- Flexible material will not print as it does not have any support up to the bowden tube
Feel free to comment.
18 Sept 2017: added centering hole where the teflon tube sits.
Print Settings
Printer:
Tevo Tarantula
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.1
Infill:
100
Notes:
Best print orientation is putting the part on the side that is most visible in the first picture, this way without support you just need to clean the big hole a bit and you get the best details where it is important.
Craftware soft support is 20% so you can easily remove supportCategory: 3D Printer Extruders