Rocky Boger 1 (Rover)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of a rover, with a rocker bogie suspension mechanism, moving solar panels and some finer details for aesthetics.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Public Domain
Hi, this is a rover i made.
It has a rocker bogie suspension, movable solar panels too. I think it is quite a cool addition to your desk- especially if you're a space nerd.
The wheel inserts should snap in place, as well as the solar panels.
You will need the washers on the 1st and 3rd wheel.
Heads up: to connect the rocker bogie suspension to the body, you will need to screw it in using m5 hex nuts.
IMPORTANT: THE MODEL IS LARGER THAN 256MM. The body is SPLIT into two halves. You will have glue it in, there is a extruded cylinder-hole geometry which can be used for better gluing
The SOLAR PANEL is also split in half as it is too big, it has a dowel connector so you will have to glue that too!