Wall Key Holder with Mail Pocket – 45° Hooks, No Supports (124 / 94 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Entryway key rack with 45° hooks and a pocket for letters or a phone. Prints standing up, no supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Standard Digital File License
An entryway organizer that keeps keys and mail in one place. Four hooks angled at 45° hold your keys, and a pocket on top takes letters, envelopes, a phone or a wallet. Mounts with two screws.
45° hooks: the key ring slides down to the wall and stays there. No lip to fight with, and keys never fall off when you grab another set.
Mail pocket: 120 mm inside (124 mm version), 24 mm deep. The bottom slopes toward the wall, so letters lean back and stay upright. C6 and DL envelopes stand on their short side.
Two sizes: 124 mm – 4 hooks + mail pocket; 94 mm – 3 hooks + pocket for a phone, wallet or sunglasses.
Mounting: 2 × Ø4 mm countersunk holes between the hooks, 60 mm apart (30 mm on the 94 mm version). The screwdriver reaches them straight on. Screws not included (3.5–4 mm, with wall plugs).
Prints standing up with no supports: the hooks and the pocket bottom are 45° overhangs, everything else is vertical. Layer lines run along the hooks, so they are strong where it matters.
Print settings
Orientation: as supplied (standing on the bottom edge of the back plate). No supports. A brim helps on beds with weak adhesion.
0.20 mm layer, 2–3 walls, 15% infill. PLA or PETG.
Time on Bambu Lab A1, PLA, 0.20 mm: 124 mm – 1 h 30 min / 46.6 g; 94 mm – 1 h 17 min / 36.3 g.
Designed from scratch by bezbajzlu.