Star Wars Eta-class Ambassador Shuttle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of the Eta-class Ambassador Shuttle from Star Wars: The Clone Wars with moving wings
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution
The Eta-Class Jedi Ambassador Shuttle appeared in Star Wars: The Clone Wars. It is very compact, the interior split between the cockpit and a small aft section. It's armed with three cannons, one in each wing, but I don't think they are ever used in the show.
This model has moving print-in-place wings. It also has a hole compatible with big pin and base (link). You will need at least two pins.
This model is based on the Eta-class Shuttle in The Clone Wars. This shuttle also appears in Ahsoka, but it looks slightly different.
Dimensions
The model is at 1:270 scale.
Length | Wdith | Height | |
|---|---|---|---|
Flying | 52.6mm | 92.5mm | 78mm |
Landed | 52.6mm | 48.5mm | 54.9mm |
Print Instructions
Printed at 0.15mm layer height. Requires supports on buildplate.
The cockpit is printed separately with the same settings.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#