Anti Moisture Silica Gel Box container two sizes.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anti Moisture Silica Gel Box container, Easy to print and easy to close.
- Ocena
- 4,5 / 5
- Polubienia
- 29
- Pobrania
- 288
- Wydruki
- 2
- Wyświetlenia
- 928
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Anti Moisture Silica Gel Box (container)
Easy to print and easy to close.
In three versions.
Important, Grease a little before assembling for the first time.
The silica gel should be larger than 2.5 mm, as the holes are 2.5 mm.
Diameter 70 mm, height 32 mm and 42 mm
- With ventilation opening in the base and lid height 32 mm
- Only with a ventilation opening in the lid height 32 mm
- High version, 42 mm ventilation opening in the lid
Printing time together approx. 4 hours.
If the lid is too heavy, then you can use "Hole Horizontal Expansion" in Cura, or the Cover_thread_plus.
The large ones fit around 85 g and the small 65 g.
Layer Height. 0,20
Wall Line Count. 7
Top Layers. 4
Bottom Layers. 4
Infill Density 35%
Print Settings
Supports: No
Resolution: as you want
Infill: 0
Layer Height: As you wan
Wall Line Count. 7
Top Layers. 4
Bottom Layers. 4