Mini 2-Piece Wire Rope Clamp for 2 mm Coated Steel Cable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact 2-piece clamp for 2 mm coated steel cable. Secures the cable using an M3 screw and nut.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Mini Wire Rope Clamp – 2 mm Coated Steel Cable
This compact cable clamp is designed to secure 2 mm diameter coated steel cable at a chosen length.
The clamp consists of two separate 3D-printed parts: a fixed body and a movable clamping piece. The cable passes through the two aligned holes, and the movable part is tightened with a screw to hold the cable securely in position.
Features
Two-piece design: fixed body and movable clamping piece
Compact size: designed for applications where space is limited
Adjustable positioning: set the desired cable length before tightening
Simple assembly: only one screw and one nut are required
Designed for 2 mm coated steel cable
Required hardware
1 × M3 × 8 mm flat-head socket screw (FHC)
1 × M3 hex nut
Assembly instructions
Insert the M3 nut into the hexagonal nut pocket in the movable part.
Pass the coated steel cable through the two holes in the clamp.
Position the clamp at the desired location and adjust the cable length.
Insert the M3 × 8 mm screw and tighten it to secure the cable.
The cable can be repositioned by loosening the screw.
Printing recommendations
Material: PETG or another suitable mechanically resistant filament
Supports: Depending on your printer and the orientation of the parts
Assembly: No glue required