1 / 5
NEMA 14 Cycloidal drive 9:1 no bearings — zdjęcie 1
1 / 5

NEMA 14 Cycloidal drive 9:1 no bearings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

NEMA 14 Cycloidal drive gearbox 9:1 9to1

Ocena
0 / 5
Polubienia
6
Pobrania
13
Wydruki
0
Wyświetlenia
133
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a cycloidal drive for a NEMA 14. It needs m2.5 by 12mm screws and nuts. No bearings, but working on one in the future. It can handle quite some torque, and is surprisingly robust. In terms of backlash it isn't great(due to no bearings). And make sure to use oil or other. If you want the best possible gearbox, please use 3mm pins cut to the right length in the output disk. As i said, i am working on bearing versions, but also different ratios and sizes.

The files are updated.

Tagi