Falcon 9 launch model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An interactive model of a somewhat accurate launch pad of the SpaceX Falcon 9 Rocket! - Includes Rocket and Launch set
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution
Falcon 9 Launch Model
On June 4, 2010, the Falcon 9 launched, one of the most iconic rockets in human history, and is especially recognisable to me because of my interest in aerospace. Since its first launch, it has been sent to space over 600 times.
Summary
This Falcon 9 Model has two main parts to it: The rocket and the set. The rocket is based off of the actual falcon 9, however, it isn't really interactable in any kind of way. However, I have tried to put a lot of detail into the model itself. The launch pad has a tilting tower to simulate when the rocket gets launched, the tower tilts back to make leeway for the rocket itself.
Use the following instructions in order to make your own Falcon 9 Model:
Make your own Falcon 9 Model!
In order to make your own model, you are just going to need the 3D Printed parts! Nothing extra :) (MY FIRST EVER PROJECT WITHOUT ANYTHING OTHER THAN CAD!)
3D Print all the parts! Make sure for the rocket, that the parts that are in the image are printed as is in Black and White to get an exact copy of what I made.
Use part 1 of the connector to connect the base to the tower
Use part 2 of the connector and use a little bit of adhesive to make a secure connection
Once all of this is done, Congrats! You have made your own Falcon 9 Launch Model!
Future Improvements
In the future, for this project, I want to add more details to the model, while also getting rid of that ugly connector in some way.