Oru Bay coaming latch (1st generation)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Common problem with Oru Bay owners that their coaming latch will break. I measured off the existing part, increased…
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 2
- Wyświetlenia
- 178
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Common problem with Oru Bay owners that their coaming latch will break.
I measured off the existing part, increased the material volume at the weakest points.
Same design applicable for both front and rear latch. Take note that because it is bigger, it will interfere slightly with packing, it was not an issue for me because I probably packed it loosely.
I had it laser cut out to aluminum and tested it out on my Oru Bay.
This design has some dimension updates to resolve the minor fitting issues I had with my original design.
Clicking on my AliExpress affiliate link below will give me a small kickback
if you purchase something within 3 days. (at no extra cost to you) https://s.click.aliexpress.com/e/_DmpFxU1