Rewind Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rotating bins that can attach to a variety of PegBoards
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Open Community License v1.1 + Micro Business v1
REWIND is a 3D-printable pegboard organizer that helps you remember how something came apart. Its six compartments store screws, washers and small components in removal order. Turn the hand crank to advance between groups, then reverse the sequence during reassembly.
Each orange lid pivots on a printed bottom pin and folds down into a small loading tray. Quarter-circle side guards slide out with the lid to help contain loose pieces. A removable parking pin holds the mechanism steady during loading.
The charcoal-and-orange cassette includes interchangeable mounts for standard pegboard and IKEA SKÅDIS—combining compact storage with a practical record of your repair.
Screws will be needed they are in the instruction manual
4 x M3 x 65 mm screws Case corners
2 x M3 x 8 mm button-head screws Dock to rear housing
6 x M3 hex nuts 4 case corners + 2 dock traps
1 x M3 x 10 mm plastic thread-forming screw