Remix for Walmart Sterilite v4 only
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original design was great, but was confusing - you had to decide what parts to print depending on which tub.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This should be much easier to build if you have the Walmart tub. Print one each of all of the files, except the Walmart 5 file, which you need 6.
I found that I don't need anything to hold the top open, I just slide it until it hits the front top insert. This leaves a few inch gap that allows the heat to escape. The tub is also very easy to remove to allow access to the print heads. The pictures should be helpful to locate the parts. I glued them together to make the top adapter easier to handle and remove if needed