Parametric Standing Pegboard with Desk Stands
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric desktop pegboard with custom stands and tool-free two-part locking pegs. Fits SKÅDIS accessories
- Ocena
- 5 / 5
- Polubienia
- 451
- Pobrania
- 1091
- Wydruki
- 1
- Wyświetlenia
- 6462
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A customizable, freestanding desktop pegboard designed to organize your workspace, electronics bench, or hobby table without drilling holes into your walls.
Compatible with standard slotted pegboard accessories (such as IKEA SKÅDIS hooks, shelves, and bins), this model allows you to generate any board size and stand depth using the included CAD file (Fusion 360 / parametric model).
Key Features
Freestanding Design: Sturdy clip-in base feet keep the board upright and stable on any flat surface.
Tool-Free Locking Pins: Uses dedicated 3D-printable locking pins that push directly through the stand and slot to lock the assembly firmly together without bolts, nuts, or glue.
Standard Compatibility: Slot spacing and sizing match Ikea Skadis pegboard ecosystems.
Parametric: Easily resize the board dimensions and stand footprint to fit your exact desk setup.
Need accessories? Pair this board with my Customizable IKEA SKÅDIS Organizers & Tool Holster Generator here:
and Customizable Hook Generator here:
Customizable Parameters
Open the parametric file, navigate to Modify > Change Parameters, and adjust the following user values:
Parameter | Default | Description / Rules |
|
| Number of 40 mm units wide (Minimum: |
|
| Number of 40 mm units high (Minimum: |
|
| Length of the foot extending from the front of the board |
|
| Length of the foot extending from the back of the board |
Tip: If you plan to load heavier tools on the front slots, increase
pegBoardStandFrontto maintain balance and prevent tipping. If your board sits flush against a wall, keeppegBoardStandRearminimal.
Recommended Print Settings
Material: PLA, PETG, or ABS
Orientation:
Pegboard: Flat on the print bed
Stands: Print upright on their base/feet. The mounting holes and clips are modeled to print cleanly without any supports.
Locking Pegs: Lay both the upper and lower peg halves flat on their sides. This aligns the layer lines along the length of the peg, ensuring maximum shear strength so the hook won't snap under tension.
Infill: 15–20% Gyroid or Grid (use 40%+ or 4+ perimeters for the stands for maximum rigidity)
Walls/Perimeters: 3 to 4
Supports: None required
Assembly Instructions
Seat the Board: Slide the bottom edge of the pegboard into the upright channels of the two stands, aligning the mounting holes with the bottom pegboard slots.
Insert Upper Hook Peg: Slide the upper peg (with the retaining hook) through the aligned slot until the hook clears the back and catches against the outer face, holding the board and stand together.
Engage Lower Locking Peg: Slide the lower peg directly into the remaining space beneath the upper hook. This wedges the assembly tightly, preventing the hook from lifting or disengaging and creating a rigid, tool-free lock.