Little MasterSpool Roller - FilamentFixer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the LMSR V2 200mm Part 2 Added small holes for both ends of the filament to be fixed. Unfortunately Fusion…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 1
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Remix of the LMSR V2 200mm Part 2
Added small holes for both ends of the filament to be fixed.
Unfortunately Fusion 360 wasn't really cooperating very much at times so I had to greatly reduce the triangle count of the original STL, so please excuse the low resolution of this.
After printing my prototype, the sizes of the holes have been adjusted and should now work very nicely.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
your choice
Infill:
20%
Filament: BasicFil PETG black
Notes:
I printed the spool with a 0.8 mm nozzle at 0.4 mm layer height and it worked out fine.
Category: 3D Printer Accessories