Magliner 10" Trough Dividers w/t Flip Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An organiser for the Backstage 10" Trough for keys, wallet and/or sunglasses for DOP, 1st and 2nd AC.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 1044
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I found on-set that our things were getting mixed together in the box and also were on display for any passer-by. These dividers help keep our things separate and hidden.
Plus the flip lid can be opened with the back/side of your hand to help reduce touching similar surfaces with the current COVID concern :)
The hinge is just 1.75mm PLA slid inside. Nice & easy!
NOTES:
- if you rotate the Hinge.stl 45 degrees when slicing, you will be able to print it within the parameters of a Ender 3 V2's bed
- make sure to print the right amount of each item. I actively left them as individuals so that you can cram as much onto one bed
- the Glue-in Slots and the hinge obviously need to be glued down
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Yes
Supports:
Yes
Resolution:
200
Infill:
20
Filament: Comgrow Creality PLA
Notes:
PRINTED ON Ender 3 V2