PrinterMods Xchange Alignment Pin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alignment pin for the PrinterMods Xchange. Intended as a replacement, just as fragile as the original. Designed to be…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Alignment pin for the PrinterMods Xchange. Intended as a replacement, just as fragile as the original.
Designed to be printed with a resin printer, 0.05 mm layer height. Supports probably needed (see chitubox image or file for orientation).
If you brake a pin and the threaded part is left behind in the Xchange tool plate, just use a small drill to drill out the largest part and than use a M5 screw from the other side to completely remove the remains from the hole.
Category: 3D Printer Parts