Aligned Y-Belt clamp for Anycubic i3 Mega
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix of Rein0021's part aligns the clamped side of the belt with the pulleys. As you can see in the image, the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 333
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This remix of Rein0021's part aligns the clamped side of the belt with the pulleys. As you can see in the image, the Y-belt now runs perfectly straight which is beneficial for precise printing as the Y-axis increments remain of identical size at all points of the print area. The original installation of the belt doesn't! Installation is quick and very easy.
Additionally you need:
4 M3 Screws
4 M3 Nuts
I strongly advise you to use all 4 screws and to not leave any of them out, as this could very well lead to the belt slipping from the clamp!
A great addition to this clamp is the Y-Tensioner by Itlowe which can be found here https://www.thingiverse.com/thing:2789837
Enjoy!
P.S.: If you like this design and it maybe solved some of your problems, please consider leaving a small tip :)
Category: 3D Printer Parts