Window open clamp with intended breaking point
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Window clamp to keep it open with intended breaking point.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked the Hellgy window stopper and the Remix for thicker sills. However, I wanted an intentional breaking point, as two stoppers had already broken when someone tried to close the window without removing the pin.
So I created this remix. It uses two short pieces of filament to create an intended breaking point — simply insert it and cut off the excess with a cutter, flush-cut pliers or side cutters, then attach the small clip from the top. I also increased the thickness of the body slightly since the original ones broke.
Use the screw from the original model — the screw sits a little tighter than on the original model, but that's fine since it was a little loose on the original model.