ESP32CAM CoreOne RIGHThand corner (and left)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ESP32 Camera for CoreOne - left AND RIGHT (fits above parked print head)
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The ESP32Cam housings I could find for the Core One were only for the front LEFT corner. I wanted two cameras, ie the front right. This design is “low” enough to fit in the front right hand corner even when the print head is homed aggressively.
I advise printing with supports. (I'm a big fan of designs that print support free but with the air-vents it got too hard)
You push the magnets in and you should be able to use square or round magnets.
I printed in the green just for the photos, "obviously" you will use a prusa black or orange ;-)
Although I reference other designs that gave me inspiration the model was designed from scratch.
Bonus - If you use Home Assistant, I had Claude Code created an ESPHome version of the camera software:https://github.com/scriptengine/esphome-prusa-connect this would allow you to put temperature and pressure sensors in the chamber and send the data back to HA