Stable turn table (additional 2nd level) for Anycubic Wash & Cure

A better supported curing table design (both single and double level model included) with spacer for the Anycubic Wash & Cure for more stability and improved curing at the underside of the print.

All parts are screwed together. Standard resin used for the main parts, flexible resin for the tires. Additional non-printed parts:

• 3 mini bearings 8 x 19 x 6 mm (698ZZ) for the wheels
• 4 mm thick acrylglass with 15 cm diameter for first level table (no drilling/fixation needed when used as a single level table, otherwise 8 mm hole needs to be drilled in the center)
• 4 mm thick acrylglass for the 2nd level (diameter of 10 cm used in this example) with a 8 mm hole drilled through the center

Parts needed for a single level table (included in the single level zip):

• Base adapter (with markigns at the outside for easier positioning in the notches of the Anycubic Wash & Cure)
• Base - no second level
• 3 wheel axels
• 3 wheel bolts
• 3 tires

The acrylglass is placed directly above the wheels, no further fixation needed.

Parts needed for a double level table (included in the two level zip):

• Base adapter
• Base - connection for second level
• 3 wheel axels
• 3 wheel bolts
• 3 tires
• 2nd level standoff
• 2nd level base
• 2nd level bolt

Print Settings

Printer:

Elegoo Mars Pro

Rafts:

Supports:

No

Resolution:

Category: 3D Printer Accessories