Ableton Move Parametric Stand – Decksaver Compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ableton Move parametric stand with decksaver compatibility
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
A minimal, fully parametric 3D-printable stand designed specifically for the Ableton Move, with full Decksaver compatibility.
The default 25° tilt angle provides a comfortable position for desktop music production. Prefer a different angle? Simply adjust the parametric model to suit your setup.
Features
Fully parametric design — customize the tilt angle to your preference
25° default tilt — ready to print out of the box
Decksaver compatible — keep your Move protected without removing it from the stand
Onshape source included — easily modify and customize the original design
Support-free printing — no supports required
Customization
The stand is designed in Onshape, with a default tilt angle of 25°. You can explore, copy, and customize the original parametric model here:
Recommended Print Settings
Material: PETG
Wall loops / perimeters: 3
Infill: 25–30%, Adaptive Cubic
Supports: None
OrcaSlicer settings:
Seam gap: 0%
Scarf joint seam: Contour and hole
Wall generator: Arachne
Z contouring: Enabled
Assembly
For a more secure, stationary setup, use M3 bolts to fasten the stand.
Enjoy!