Camelbak Lobo Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pipe sliders and drinking tube holder for sternum strap of Camelbak Lobo
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I lost the sternum strap on my Camelbak Lobo (snagged on a limb while riding), so I designed and 3D printed replacement parts to build a custom assembly. Unlike the original design, this setup replaces the magnetic tube holder with a secure snap/click mechanical interface.
Features & Design Notes
Snap-Click Tube Mount: Holds the hydration tube firmly without relying on magnets.
15mm Hardware Compatibility: Sized for 15mm (~5/8") nylon webbing, tri-glides, and side-release buckles.
Assembly: The webbing can be hand-stitched directly onto the pipe sliders, or triple-threaded through tri-glides to secure the assembly without sewing.
Includes Extra Part: Includes a standalone 15mm tri-glide designed while learning Onshape.
Recommended Print Settings
Material: Printed in ASA for optimal UV and outdoor weather resistance. However, almost any rigid filament (PLA, PETG, ABS) will work since the sternum strap only keeps shoulder straps centered rather than bearing heavy loads.
Orientation & Supports: Refer to the provided OrcaSlicer
.3mffile for proper print orientation on the bed. Only the 15mm tri-glide requires support (a support enforcer cube is centered over it in the project file).
Happy Making!