Case for Emco Unimat 3 replacement motor governer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case is a robust way to connect a motor regulator to the replacement motor on the Unimat 3.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
The original motor for the Unimat 3 has its limitations; few fixed speeds, limited run time, expensive replacement parts, low power, ... Replacement motors and regulators are cheap, but come without a proper case. This model is a fix for that.
Printed with PETG, it uses M3 inserts to attach it with metal strips (beer can actually) to the motor. It is made in two parts and uses M3 screws to attach them. More perimeters for the bottom part gives extra strength to the inserts. A small support to the center of the top reduces sagging and cleanup work afterwards.
The regulator is a ZK-MG MOTOR GOVERNER. The motor is a ZY6812, 24V DC 120W.
The scad code is quite messy, maybe a cleanup for the next version :-). But first a proper try-out.