1 / 4
Snap-Fit Case for 15A Dual DC Power Switching Board (Ideal Diode UPS)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-fit case for the 15A Dual DC Power Switching (ideal diode UPS) board, with a light-pipe hole for the LEDs.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Created specifically for this board: 15A Dual DC Power Switching Board Module Dual Low Voltage Differential Ideal Diode UPS Uninterruptible Power Supply
Board dimensions (L × W × H): 46 × 32 × 15 mm.
Recommended print settings: 0.2 mm layer height, 15% infill, no supports.
Light pipe hole: fill with a dab of clear hot glue to carry the board’s LEDs (red and green) to the lid.
Assembly: no screws needed. Push the lid into place. It can be opened and closed repeatedly.
