TeSeek Nano Light Equitorial Mount Ball Head Drive Mount Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter for the TeSeek Nano star tracker to allow for better fit of ball heads to the stepper motor drive
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a better means of attaching the ball head to the stepper mount drive on the TeSeek Nano Light Equitorial Mount star tracker. This is an excellent low cost entry to astrophotography and star trackers.
This adapter helps the ball head to be securely attached, whilst also allowing to be able to be relatively easy to remove at the end of a photography session. The small amount of give and grip with TPU helps to meet this requirement.
The part was a simple design in Tinkercad. I've provided two sizes of adapters, 40mm & 45mm, to help support an attached ball head.
The part was printed in TPU 95A (Eryone) on an Ender 3V2 running Klipper and direct drive extruder. The material settings were 0.2mm layer height, 50% infill with fuzzy skin contour selected. This took approx 1 hour to print. Print in the orientation of the STL to avoid the use of supports.
The 45mm size adapter still fits within the general dimensions of the TeSeek Nano. My other requirement was for the complete assembly to fit with in a bento box case that I had already printed for the star tracker.