1 / 2
3/8 x 24 brake proportioning valve tool jeep wrangler 1987-1995 — zdjęcie 1
1 / 2

3/8 x 24 brake proportioning valve tool jeep wrangler 1987-1995

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

used an m3 x25mm machine screw threaded through to hold brake proportioning valve from moving while bleeding brakes.

Ocena
0 / 5
Polubienia
2
Pobrania
1
Wydruki
0
Wyświetlenia
15
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

Could not find a tool that worked for my 1987 jeep wrangler to prevent proportioning valve from tripping while bleeding troublesome brakes. Only way i was able to reset it was to disconnect the brake lines and physically push it back with a screwdriver. This will lock it in place for testing purposes. 
Will fit cherokees and probably other vehicles. 



3/8 x 24 thread about 6.5mm long
13mm hex head extruded 13 mm long
m3 threaded hole will require minimum 25mm long cap screw. 

printed with 4 walls horizontally for stregth. 
enable supports on print bed only

Tagi