1 / 2
HJV USB & SD-card holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I redesigned Lalo_Solo´s allready designed holder. I made it little bit shorter and less space for USB- and SD-cards,…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I redesigned Lalo_Solo´s allready designed holder. I made it little bit shorter and less space for USB- and SD-cards, becaude I don´t need so many. I increased space between micro-SD cards and now cards inserts holes straight, space between them are bigger because I´m a quadriplegic and my fingers move only because of wind.
Measurements: 120x35x18mm
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0,2mm
Infill:
20%
Filament: Real PLA
Category: Organization