1 / 7
HGLRC Nblade MAX X 5 inch Quadcopter Spacer Plate — zdjęcie 1
1 / 7

HGLRC Nblade MAX X 5 inch Quadcopter Spacer Plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a spacer which allows a HGLRC 60A BL32 8S M3 3-8S MINI 4IN1 ESC, to be used on the above frame.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
16
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This allows the capacitor on the ESC board to fit fully into the lower frame with the smaller 1 or 2 mm vibration absorbers. In turn this allows the ECS board to sit low enough to leave clearance between it and the backing plates on the copters LED integrated side plates. There are two versions. Installed is the full frame version. The partial version is pictured and will allow some ventilation into the lower cavity. It's just an opening. I really don't know how effective the ventilated version is. The hardware for the lower frame needs to be 2-3 grip lengths greater than the kit hardware depending on your desired grip.