03-08 Accord/TSX Sun Visor Clip Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement sun visor clip I made for my 08 TSX. Should also fit 03-08 Accords and likely other Hondas from those years
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Modeled this to replace a broken sun visor clip in my 08 Acura TSX. Fits securely into the holes for the original visor clip and the visor itself still snaps in to the clip.
Installation is super easy; Once the old clip is removed, just insert this one and rotate it 90 degrees. It fits tightly enough that it won't rattle or rotate itself out of the hole.
Print it laying on the flat face on the back. This orientation shouldn't need any supports and will be plenty strong with 3-4 walls. I used ASA for mine so it will be fine with heat/sun exposure. Depending on your use case and climate ABS, PETG, or even PLA will work for at least a while.