Costco Kirkland Signature UltraClean Laundry Cup/Drip Catcher - Compact and Sturdy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix to reduce height and add rigidity and strength. Original model fit nicely, but was a bit too flexible for my need
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is specifically designed for the Costco Kirkland Signature UltraClean 146 Loads 5.73L Laundry Detergent Bottle. but may fit other products.
Allows you to rest the laundry detergent cup under the spout. But also it catches any drips.
To install
remove the laundry cup
Turn the print horizontal with the hole aligned to the spout.
Push in and rotate 90° to lock in. The "tabs" on the sides should hold the print in place.
This remix of the laundry bottle cup holder/drip catcher to enhance the original design:
Reduce overall height by 15mm
Added additional 2mm perimeter along edge to strengthen
Print in PLA or PETG. 0.2mm layer height. Default Orca settings + SUPPORT. STL oriented for optimized print orientation and minimal supports.