1 / 2
Hex Key Stand - Labelled Holes for a Metric Allen Key Set 1.5 to 10 mm (OpenSCAD) — zdjęcie 1
1 / 2

Hex Key Stand - Labelled Holes for a Metric Allen Key Set 1.5 to 10 mm (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Keeps a metric Allen key set upright, each hole engraved with its size. Edit the size list in OpenSCAD.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
15
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A stand that keeps a metric hex (Allen) key set upright on the bench, so the right key is always easy to find and none go missing. Each hole has its size engraved in front of it: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10 mm.

The holes are hexagonal, 0.4 mm bigger than the key, and 16 mm deep, with a small chamfer at the top. Stand the keys long end down so the short ends make easy handles. Size: about 91 x 25 x 18 mm.

Got a different set, or imperial keys? Open the .scad file in OpenSCAD (free), go to Window > Customizer, and type in your own list of sizes (smallest first), the clearance, the depth and the label size. The spacing and the length work themselves out.

Print settings: PLA or PETG, 0.2 mm layers, 15% infill, no supports. It prints flat as shown. For the smallest holes, 0.12 or 0.16 mm layers give cleaner edges. On a Bambu Lab H2C it takes about 42 minutes and 17 g. A ready plate (the H2C .3mf) is included.

Designed with AI assistance, checked and sliced by me. License: CC BY-NC-SA 4.0.

Tagi