Dashboard power outlet cap replacement for Jeep Wrangler 2011-2018 and Ram Promaster 2014-2026
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips the 12v socket ("cigarette lighter") into the dashboard trim so it doesn't fall out. Replaces OEM # 5026970AA
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Does your 12v socket fall out of the dash, or did you break the plastic ring when removing the socket for whatever reason?
Well here you go. It's basically the same as the OEM part, but without the little cover. Made in Dune 3D, an open source parametric CAD program.
Printing:
No supports needed. Print with the wide ring side on the bed. I printed at 0.2mm layer height but it would probably be fine at 0.3 too. I used Sunlu PLA+ but you might want to use PETG or another filament with a high glass transition temperature so it doesn't deform in the summer heat.
Installation:
Pull the vehicle wiring through the trim hole and this clip ring, plug the wiring into the 12v socket, press this ring into the dashboard trim hole, and press the 12v socket into the ring. The ring holds the 12v socket with a firm friction fit that (unlike the OEM one) will actually release if you give it a pull.
Fitment:
Jeep Wrangler: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Ram Promaster 1500, 2500, 3500: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Fiat 500: 2015, 2016, 2017, 2018, 2019
Mopar Power Outlet Cap, part number 5026970AA