Reservoir cap for bleeding brakes.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cap for the brake fluid reservoir with an air hose fitting.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 322
- Wydruki
- 1
- Wyświetlenia
- 1641
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Useful for pressurizing the fluid reservoir, makes bleeding or a complete brake fluid flush a breeze.
Main threads should fit most European brands (at least the internet thinks so) but I have tried it successfully with several Volvo's of different vintages.
I printed mine in PLA for strength, layer adhesion and ease of getting the quite steep overhangs good. Time will tell if brake fluid degrades it. Also I printed it almost solid.
You will need an air hose fitting with a BSP (G) ¼" thread and a rubber gasket. You can make one from gasket material or take one from an old reservoir cap.
When using, make sure to turn the regulator down sufficiently, I don't think the reservoirs are made to take a lot of pressure, 1 to 2 atm relative pressure should be plenty.