Snowflake Ornament Generator - Endless Christmas Tree Snowflakes (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Every seed number grows a different six-armed snowflake with a hanging loop. Four ready to print.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Snowflakes for the Christmas tree, the window or gift tags, and no two need to be the same. The generator grows a six-armed snowflake from a seed number: the branches, their angles and lengths, the tips and the middle all change with the seed, so every number gives a new design. Each one has a hanging loop at the top.
The plate has four ready to print (seeds 3, 7, 11 and 19), each about 70 mm across and 2.6 mm thick. They print flat in about 11 minutes each and use very little filament, so they are great for a whole tree or for filament swaps and leftovers.
Grow your own: open the .scad file in OpenSCAD (free), go to Window > Customizer, and type any numbers into the seeds list (one snowflake per number). You can also change the size, the thickness and the line width. Press F5 to preview new seeds before you export.
Print settings: white, silver, light blue or glitter PLA, 0.2 mm layers, no supports. A smooth PEI or glass plate gives a shiny back. On a Bambu Lab H2C the four take about 44 minutes and 11 g. A ready plate (the H2C .3mf) is included.
Designed with AI assistance, checked and sliced by me. License: CC BY-NC-SA 4.0.