1 / 2
Halloween Wall Bats - Set of 6 Bat Silhouettes in 3 Sizes (OpenSCAD) — zdjęcie 1
1 / 2

Halloween Wall Bats - Set of 6 Bat Silhouettes in 3 Sizes (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Flat bat silhouettes to stick on a wall or window as a swarm. Six on one plate, any sizes you like.

Ocena
0 / 5
Polubienia
2
Pobrania
11
Wydruki
0
Wyświetlenia
30
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A swarm of bats for Halloween: flat bat silhouettes with pointed ears, scalloped wings and little cut-out eyes. Stick them on a wall, a door, a window or a mirror with removable mounting putty or tape, so they look like they are flying across the room.

The plate has six bats in three sizes (110, 85 and 60 mm wingspan), 2 mm thick. They print flat in black filament with no supports and only use about 15 g between them.

Make your own swarm: open the .scad file in OpenSCAD (free), go to Window > Customizer, and type in the wingspans you want (one bat per number), the thickness, and whether to cut out the eyes. Print a few plates in different sizes for a bigger swarm.

Print settings: black PLA (glow-in-the-dark looks great too), 0.2 mm layers, no supports. A textured plate gives a nice matte back. On a Bambu Lab H2C the six take about 37 minutes and 15 g. A ready plate (the H2C .3mf) is included.

Designed with AI assistance, checked and sliced by me. License: CC BY-NC-SA 4.0.

Tagi