1 / 3
Air Hockey Paddle Base Plate (Hollow Paddle Repair) — zdjęcie 1
1 / 3

Air Hockey Paddle Base Plate (Hollow Paddle Repair)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Base plate for a hollow air hockey paddle that lacked a proper base. Press-fits a 31 mm opening; add a felt circle.

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
15
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Noncommercial

A base plate for an air hockey paddle (mallet) whose felt bottom has come off due to lack of a baseplate supporting it. Mine lost its felt, and it turned out the paddle is hollow underneath. This plate closes it up and gives it a flat bottom again.

Will it fit your paddle?

It isn't tied to one brand. It fits any paddle whose bottom matches these dimensions:

  • Bottom outside diameter: 74 mm. The plate is a 74.0 mm disc, 1.2 mm thick.

  • Opening in the hollow bottom: 31 mm across. The plug is 31.0 mm in diameter and 3.8 mm tall, with no extra clearance, so it press-fits.

  • The hollow needs to be at least 3.8 mm deep.

Measure your paddle before printing. Mine came with a SereneLife 58" air hockey table.

Fitting it

  • Press the plug into the opening in the paddle's bottom.

  • It holds as a press fit. Add glue if you want it permanent.

  • Stick a felt circle on the flat side, as it came. The felt is what glides on the table.

Printing

  • PLA, 0.20 mm layers, 4 walls, 40% infill.

  • Print it flat side down, the way the STL is oriented, so the side that touches the table is the smooth bed side. No supports, no brim.

  • G-code is included for the Prusa MINI/MINI+ (0.4 nozzle, Input Shaper firmware) and the CORE One L (0.4 HF nozzle)

Tagi