Dymo LabelWriter 450 paper guide replacement part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Paper guide for the LabelWriter 450/Turbo replacement, in case yours is broken.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
A while ago the paper guide broke off from the main plastic rail, and it's been bothering me so I decided to model a replacement based on the original as best I could. Some small adjustments and bam it works!
A word of caution though, to be able to replace the guide you have to remove the top black plastic retaining cover/panel CAREFULLY (glued in place from the factory). Once its off, print and replace the guide by angling it so it slides on. Place the black plastic top cover back on with adhesive tape or hot-glue that will make it stay in place for testing. Personally wouldn't use superglue in case you have to replace it again, unless you're confident.