1 / 12
Manker E03H III and E02 IIi Carry / Storage Case — zdjęcie 1
1 / 12

Manker E03H III and E02 IIi Carry / Storage Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Case specifically sized for Manker E03H III and E02 III models. Also storage for 2x 18350 or 1x 18650 batteries

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
15
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

Cases for Manker E03H III and E02 III flashlights

Assembly requires 2x 8mm M3 panhead hex machine screws for the hinge and 4x 3mm x 2mm neodymium pill magnets for the latch (source: Amazon)

There is a 3D printable insert for the lid that can be printed in Glow-In-the-Dark filament and glued in place

For the E02 III case, a sleeve of 2mm thick EVA craft foam needs to be inserted to prevent rattle and center the light.

The E02 III case can be used as storage case for 2x 18350 or 1x 18650 batteries.

Tagi