Rear-Motor Baja Bug Conversion for the Losi Micro-T (bug30)

Full instructions can be seen here:

https://officepizzaparty.neocities.org/Micro%20Baja%20Assembly%20Instructions.pdf

Running video:

This is a simple conversion for the Losi Micro-T that converts the layout to rear motor and increases the ride height using the Injora Bug30 body and Injora 0.7" tires. The body locations match the scx30 so bodies are swappable between the two chassis. The battery hold down is replaced with a convenient battery strap and it is designed to use stock electronics. The shocks are set with 25wt oil and a 4mm preload in the back (included in the .stls). 

How does it drive? Super awesome on dirt and slick surfaces like hardwood, rooster tails and pretty controlled powerslides. On high grip surface it wheelies and tends to traction roll but the extra body roll is fun. This is my favorite version of the Losi Micro that I've driven. It also has a higher tendency to bottom out, so big jumps aren't its strong suit. It thrives in a "scale", off road, low traction environment. 

Required Materials:

• 1x Injora bug30 body (for the scx30)

• 4x Injora 0.7" tires (xhx pins are cool)

• 1x Losi Micro-T

Printing Notes:

• Small parts, I printed them all with a 0.2mm nozzle at 0.10mm layer height.

• 6 walls? the more the better imo

• Auto-oriented

• Auto supports

• The threads on these screws are TINY, so if your filament is over/underextruded it will affect the functionality of the threaded holes

Parts List:

• 1x Front Shock Tower

• 1x Rear Shock Tower

• 4x Wheels

• 1x Battery Strap

• 1x Left Side Rail

• 1x Right Side Rail

• 2x Preload Spacers

• 1x Rear Body Mount

• 1x ESC Tray

• 1x Chassis Brace

Enjoy!