1 / 6
Rollease to AM22 / AM25 Tuya Roller Shade Motor Mount Adapter (v1.5) — zdjęcie 1
1 / 6

Rollease to AM22 / AM25 Tuya Roller Shade Motor Mount Adapter (v1.5)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter for fitting an AM22 roller shade motor to a Rollease bracket, with editable STEP and prepared 3MF. Updated

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
8
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

v1.5 update: I updated the fillet to make the central pin stronger, and reprinted in PCCF. I uploaded a new .3mf file with the model oriented at an angle with supports to minimize the chance of sharing and increate part strength. I also uploaded the Shpr3d file. 

A custom mounting adapter for fitting an AM22 roller shade motor to the Rollease bracket used in my shade installation. The adapter connects the motor's cross-shaped mounting interface to the bracket's two mounting tabs.

The final model was revised in Shapr3D. I am sharing the editable STEP, mesh exports, and my prepared PrusaSlicer project so others can inspect the geometry, adapt it to their hardware, or start from the saved print setup.

FILES

• rollease_am22_final.step — authoritative final CAD model for dimensional edits.

• rollease_am22_adapter_final.3mf — prepared PrusaSlicer project with orientation and support enforcers configured. Open as a project to retain the setup.

• rollease_am22_final.obj — final mesh; coordinates in millimeters.

• rollease_am22_final.stl — slicer-friendly mesh from the final STEP.

• README.txt — file guide and printing notes.

• Legacy V1 archive — original V1 STEP and Python generator, included as development history only; superseded, and does not generate the final adapter.

PRINT SETUP

The included 3MF uses Prusament PP Carbon Fiber for CORE One with a 0.4 mm nozzle, 0.20 mm layers, 70% infill, and snug supports selected through support enforcers. Orientation is saved in the project.

Use an abrasion-resistant nozzle and a print surface suitable for PP-CF. Check your printer, material, and nozzle profiles before slicing. The 3MF is a slicer project, not ready-to-run G-code.

PLA can be used to check fit before printing in the final material. Remove supports carefully from the motor interface and tabs, and test both interfaces before assembly.

FIT AND USE

This is a custom adapter for my particular hardware, not a universal Rollease/AM22 compatibility claim. Compare the STEP with your bracket and motor before printing. The application discussed during development uses 0.5 N·m motor torque; this is the motor's nominal rating, not a tested load rating for the printed adapter.

The final adapter has not been independently fit- or load-validated as part of the accompanying CAD analysis. Please share fit results, material choices, and useful dimensional changes in a make or remix.

DESIGN NOTES

The final geometry is my revised design. AI tools assisted with development analysis, mesh exports, and this documentation. The CAD render shows the final model, not a photograph of a printed part.

LICENSE

Creative Commons Attribution–NonCommercial–ShareAlike 4.0 (CC BY-NC-SA 4.0).

Tagi