X-Sense XS01-M ceiling mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
X-Sense Smoke Detector Ceiling Mount – 80 × 80 mm Junction Box Ceiling mounting adapter for an X-Sense smoke detector,
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Open Community License v1.1
X-Sense Smoke Detector Ceiling Mount – 80 × 80 mm Junction Box
Ceiling mounting adapter for an X-Sense smoke detector, designed to fit an 80 × 80 mm ceiling junction box with approximately 85 mm between the mounting screw centres.
This 3D-printable adapter allows the smoke detector to be mounted using the existing screw holes in the junction box, providing a neat installation without drilling additional holes in the ceiling.
Compatibility
Before printing, check the mounting dimensions and confirm that the adapter fits your specific smoke detector model.
Ceiling junction box dimensions: 80 × 80 mm
Mounting screw spacing: approximately 85 mm, measured centre to centre
Designed for an X-Sense smoke detector
Mounting instructions
Follow these simple steps to mount the smoke detector:
Place the mount on the back of the smoke detector and turn (tight fit)
Screw the bracket in the junction box diagonally
Hold the cover plate against the ceiling
Screw in the smoke detector
Enjoy!!
Updates:
A second version with a longer thread is now available. Use this version when the ceiling junction box is recessed into the ceiling and the standard version does not reach far enough.