Prusa Mini Front Plate Multicolor with Prusa Mini Printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to make the front plate of my Prusa Mini with colors and I found a way to do it
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
I propose here a Prusa Mini Front Plate of replacement multicolor but print with your Prusa Mini.
There is no change of the general shape, only of the front.
Print Instructions:
I used a method learn with the work of:@fuchsr
The method is simple, think about transforming yoursefl into MMU device, and allow some time to do it.
Simply open the 3mf file, adjust your filament choice if needed, and slice it. The 3mf file is configured to mimic a printer with 3 extruders. As a result, your printer will go home for a filament change when required.
Start the print with White filament and please note that PrusaSlicer will insert an unnecessary filament swap at the very beginning of the print. So when you start the print and it unloads immediately, simply reload the same filament.
The filament order is:
White-Orange-Black-White-Orange-White-Black
I adjusted the temperature of my PETG filament at the lowest level to avoid angel hair and after the third layer I manually increased the temperature.
Hope you will enjoy it!