Ender 3 Pro bottom PSU mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slim, light, easy to print parts to move Ender 3 Pro Meanwell PSU under a rear part of a printer
- Ocena
- 4,6 / 5
- Polubienia
- 106
- Pobrania
- 468
- Wydruki
- 5
- Wyświetlenia
- 4099
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Ender 3 Pro MeanWell PSU fits perfectly under Y axis extrusion in the back.
You can print 1 or 2 front parts (to be put into central 4040 extrusion), I decided that one is enough for me.
To fix left and right part you will need 4pcs M5 screws (I used ISO7380 M5x10) and 2pcs M4x6 (I used ISO7380 M4x6)
There are 2 versions of the left parts with different power plug fixing screw holes diameter.
UPD 22.05.09 Fixed some minor flaws
UPD 22.10.25 Redid Front piece to be sturdier.
Added light version which is also easier to install - just roll it in. This piece is need to be tested though.
Print Settings
Rafts:
No
Supports:
No
Resolution:
200
Infill:
25
Filament: ABS Maker PETG Black
Notes:
Optimized for 0.2mm layer height and 0.4 nozzle
Optimizations include:
perimetral chamfer of 2 bottom layers to avoid "elephant foot"
all inside holes diameters are enlarged by 0.25mm to be of the correct size after slicing
Category: 3D Printer Parts